Transferring files to OSDP readers in Synergis™ Softwire 2.0 - Cloud Link Roadrunner™ 2.0

Cloud Link Roadrunner™ User Guide 2.0
Product
Cloud Link Roadrunner™
Content type
Guides > User guides
Version
2.0
ft:locale
en-US
Last updated
2022-07-28

You can upgrade the firmware or configuration of OSDP readers by transferring files to the readers in the Cloud Link Roadrunner™ Portal.

What you should know

  • The following procedure only applies to OSDP readers that connect directly to the Cloud Link Roadrunner™ unit.
  • Use the firmware and configuration files provided by your manufacturer.

Procedure

  1. Log on to the Cloud Link Roadrunner™ unit.
  2. Click Configuration > Advanced OSDP.
  3. In the File Transfer section, select the check box in the Transfer column of the readers to which you want to transfer the file.
  4. Click Select file.
  5. In the file browser, select the firmware or configuration file, and click Open.
  6. Click Transfer file.

Results

The firmware or configuration is applied after the selected readers restart.