Logging on to the Cloud Link Roadrunner appliance - Cloud Link Roadrunner 2.1.0

Cloud Link Roadrunner™ User Guide 2.1.0

Applies to
Cloud Link Roadrunner 2.1.0
Last updated
2023-03-07
Content type
Guides > User guides
Language
English
Product
Cloud Link Roadrunner
Version
2.1

Log on to your Cloud Link Roadrunner™ appliance through the Cloud Link Roadrunner™ Portal.

Before you begin

The following information is required to log on for the first time:
Appliance hostname or IP address
The hostname is on the label sticker on the appliance. The hostname consists of CLRR (for Cloud Link Roadrunner), followed by the appliance's MAC address. For example, CLRR0010F32CF482.

To obtain the IP address, ping the appliance. For IPv6 IP addresses, you must remove the last two digits of the value in brackets that comes back from the ping. The IPv6 address includes the brackets. For example, [fe80::ebf:15ff:xxxx:xxxx].

Default username and password
The default username and password are admin and softwire. You are forced to create a new password on first logon.

What you should know

  • For a list of supported web browsers, see Supported web browsers in Cloud Link Roadrunner 2.1.0.
  • Starting in Cloud Link Roadrunner firmware 2.0.3, if you are not using DHCP, you can connect using a link-local address. Prior to 2.0.3, IPv6 is required to use a link-local address.
  • If you are not using DHCP, alternate network connections prevent the Cloud Link Roadrunner™ Portal from loading.

Procedure

  1. (First logon only) Connect a network cable from the network switch to the appliance's LAN port.
    For more information, see Cloud Link Roadrunner wiring diagram.
  2. Open a web browser, and enter https:// followed by the appliance's hostname or IP address.
    Example: The following is an address using the hostname: https://CLRR0010F32CF482

    The following is an address using the IPv6 IP address format: https://[fe80::ebf:15ff:xxxx:xxxx]

  3. If you opened a new browser session to log on to the appliance, you get a certificate error message. Follow your browser’s on-screen instructions to continue to the website.
  4. Enter the username and password, and then click Log on.
    If you already changed the default password, the home page is displayed. If you have not changed the default password, you are forced to create a new one before logging on.
  5. Enter a new Strong or Very strong password, confirm it, and then click Change password.
    Logon page of the Cloud Link Roadrunner™ Portal forcing you to change the default password.
    The password is updated for the user, and you must log on using the new password.