Configuring the Cloud Link Roadrunner unit - Cloud Link Roadrunner 3.1.0

Cloud Link Roadrunner™ User Guide 3.1.0
Product
Cloud Link Roadrunner
Content type
Guides > User guides
Version
3.1
Release
3.1.0
Language
English
Last updated
2024-07-22

You can configure the Cloud Link Roadrunner™ unit after the pre-configuration steps are completed.

Before you begin

Perform the pre-configuration steps.

Procedure

  1. (Optional) Change the default X.509 certificate of the unit.
  2. Upgrade the Cloud Link Roadrunner firmware to the latest version.
  3. Physically attach the OSDP readers to the unit.
  4. Establish communication between the unit and its OSDP readers through the Cloud Link Roadrunner™ Portal.
  5. Test your hardware connections and configuration and make adjustments if necessary.
  6. Configure the access control behavior of the unit.
  7. Add the unit to an Access Manager so it becomes part of your Security Center system.