Creating virtual OSDP readers in the Cloud Link Roadrunner Portal - Cloud Link Roadrunner 3.1.0

You can create virtual readers from a physical OSDP reader so that you can control all the doors in a cabinet, using only a single physical reader.

1. Log on to the Cloud Link Roadrunner™ unit.
2. Click Configuration > Hardware.
3. At the top of the Hardware column, click Add ().
4. In the Add hardware dialog box, configure the following:
   

   Hardware type

   Select Virtual.

   Reader

   Select the reader from which you want to create virtual readers.

   Door code

   Enter a code, and then click Add. The virtual reader and its door code will be listed. Enter other door codes to create more virtual readers as required.

5. Click Save.

Results

The Virtual integration is added to the Hardware column. When you click the Virtual integration, the virtual channel created from the physical reader is listed in the Channels column, and the virtual readers are listed in the Interfaces column.

In Config Tool, the Virtual integration on the Hardware page of the Cloud Link Roadrunner unit is updated to display the virtual reader configuration, and the virtual readers replace the physical reader on the Peripherals page.