DMP intrusion panel terminology - DMP intrusion panel 4.1

DMP Intrusion Panel Extension Guide 4.1

series
DMP intrusion panel 4.1
revised_modified
2021-06-11
category_custom
Guides > Plugin and extension guides
prodname_custom
Ecosystem (add-ons) > DMP intrusion panel
vrm_version
4.1

DMP intrusion panel uses specific terms. Here are the definitions of some common terms and their equivalents in Security Center.

DMP term Description Security Center term
24-hour zone 24-hour zones include Fire, Panic, Emergency, and Supervisory. Unlike regular zones, a 24-hour zone is always armed and no area assignment is needed. 24H zones (an intrusion detection area)
Ambush The duress code is used if an attacker or robber ambushes you and forces you to disarm the intrusion detection area. Duress
Area A group of zones configured on the intrusion panel that specify a physical area, such as a floor of a building. These groups can be monitored and armed in Security Desk. Intrusion detection area
Control panel The intrusion panel that can be monitored and controlled by Security Center. Intrusion detection unit
DMP command processor panel The intrusion panel that can be monitored and controlled by Security Center. Intrusion detection unit
Output Output pin connected to the intrusion panel. Output
User code The account a person uses to access the functionality of the intrusion panel, such as arming and disarming areas. Cardholder
Zone1 Inputs for devices such as glass break detectors, motion sensors, temperature sensors, and so on, that are connected to the intrusion panel. Input

1If you create a zone with a blank type in Remote Link, it will not appear in Security Center because the zone is not fully configured.

For detailed descriptions of the DMP terms, refer to the Appendix of the Programming Guide for your model of DMP intrusion panel, which is available for download from the DMP product page and from https://dmp.com/guides.

IMPORTANT: Content in this guide that references information found on third-party websites was accurate at the time of publication, however, this information is subject to change without prior notice from Genetec Inc.