By linking cameras to intrusion detection areas and intrusion detection inputs, when
an intrusion event occurs, the video from the linked cameras is displayed in the Security
Desk monitoring tile.
What you should know
When cameras are associated to the intrusion detection area and related intrusion
detection inputs and an event occurs, the most relevant camera is shown first in the
monitoring tile. For example, when an area event occurs, only the cameras assigned to
the area are shown in the monitoring tile. When an input event occurs, the camera
assigned to the input is displayed first, and the cameras assigned to the area are
displayed in the other tiles. You can cycle or unpack the tile to display the video from
the other cameras.To assign cameras to intrusion detection inputs, follow the instructions in Assigning cameras to intrusion detection inputs.
Procedure
-
From the Config
Tool home page, open
the Area view task.
-
Select the intrusion detection area to configure, and then click the
Cameras tab.
-
Click Add an item (
).
-
In the dialog box that opens, select a camera, and then click
OK.
The camera is added to the
Cameras list.