Configuration overview for DSC PowerSeries intrusion panel - DSC PowerSeries intrusion panel 4.0

DSC PowerSeries Intrusion Panel Extension Guide 4.0

series
DSC PowerSeries intrusion panel 4.0
revised_modified
2019-03-11
category_custom
Guides
Guides > Plugin and extension guides
prodname_custom
Ecosystem (add-ons) > DSC PowerSeries intrusion panel
vrm_version
4.0

Configuration consists of a series of steps that need to be followed in sequence.

The following table summarizes the configuration process for the DSC PowerSeries intrusion panel integration.

Phase Description See
1 Ensure that the DB9 "straight-through" serial cable that connects the intrusion panel to the Security Center system is connected to the Security Center server hosting the Intrusion Manager role. DSC_IT-100_Installation_Manual.pdf
2 Read all the required information, and perform all the required tasks before integrating the DSC PowerSeries intrusion panel in Security Center. Preparing to integrate DSC PowerSeries intrusion panels
3 Read all the required information, and perform all the required tasks before integrating the DSC PowerSeries intrusion panel in Security Center. Preparing to integrate DSC PowerSeries intrusion panels
4 Configure the inputs, outputs, and partitions on your DSC PowerSeries intrusion panel. DSC PowerSeries documentation
5 Set up communication between the Security Center server and the DSC PowerSeries intrusion panel using IP network or RS-232 communication. Preparing to integrate DSC PowerSeries intrusion panels
6 Create the Intrusion Manager role in Security Center to manage the intrusion detection unit. Creating the Intrusion Manager role for DSC PowerSeries intrusion panel integration
7 Create the DSC PowerSeries intrusion panel as an intrusion detection unit in Security Center. Creating the intrusion detection unit for DSC PowerSeries intrusion panel integration
8 Configure the intrusion detection unit basic properties (for example, activating the inputs, outputs, and intrusion detection areas to monitor). Configuring properties for DSC PowerSeries intrusion panel intrusion detection units
9 (Optional) Map intrusion detection areas to cameras to view video associated to intrusion events in Security Desk. Mapping intrusion detection areas to cameras
10 (Optional) Create events-to-actions for DSC PowerSeries intrusion panel events received in Security Center to trigger actions. Mapping intrusion panel events to Security Center actions