Configuring video wall settings - Video Wall 3.3.0

You can configure certain settings of the video wall directly from Config Tool. These settings are also configurable from the web page of the video wall.

1. From the Config Tool homepage, open the Plugins task.
2. In the Plugins task, from the entity browser, expand the plugin role and the EIZO Video Wall unit, and then select the video wall you want to configure.
3. Click Properties
4. Configure the following fields:
   

   Brightness

   Adjust the brightness percentage of the monitor.

   Aspect ratio mode

   Select an aspect ratio for the video.

   Camera name display

   Display or hide the name of the camera on the video.

   Key lock

   When set to ON, the buttons on the front of the monitor are disabled.

   USB lock

   When set to ON, the use USB devices are disabled.

   NOTE: When this setting is modified, the monitor must be restarted.

   IR controller lock

   When set to ON, the operations from the remote control are disabled.

   Fullscreen

   Display or hide the menu on the monitor.

   Local display control

   Set to ON if you want to control the video wall using Security Center, and control the video wall directly, for example, using the remote or the monitor's web page. Set to OFF if you want to control the video wall using only Security Center.

   NOTE: When set to OFF, changes that are not made using Security Center will be reverted unexpectedly.

   Sleep prevention mode

   Select a schedule. When the schedule is active the video wall is in Live Image Screen mode. When the schedule is inactive, the Quick Shutdown mode is enabled.

5. To configure more video wall settings, click Open settings web page.