Adding i-PRO BWC 4000 body-worn cameras in Clearance - Clearance

Before you can upload video to Clearance with an i-PRO BWC 4000, you must add the i-PRO BWC 4000 in Clearance by docking the camera in a docking station connected to your system, configuring the camera, and authenticating it with Clearance.

1. Dock the camera.
2. Click Configurations > Devices.
3. Click Create new device.
4. Enter a name for the camera, its serial number, and specify the manufacturer and model.
   
5. Click Save.
   The body-worn camera is created.

   
6. Log into the BWC 4000 configuration tool.
7. From the BWC Config Tool window, click Detect ().
   Trouble: If the BWC 4000 is not detected, contact your IT team for support on assigning temporary IP addresses.

   
8. Click Edit ().
   The BWC 4000 Configuration Tool window opens.

   
9. From the Edit configuration file window, click the Evidence server tab.
10. In the System Mode section, select UDE.
11. In the Device Management Server section, enter the information you copied from the Credentials section.
    
12. From the Devices page in Clearance, select the relevant device and assign the body-worn camera to a user.
13. (Optional) In the Device group field, select a group to include the device in.
    NOTE: Device groups are used to manage the firmware version for groups of devices.
14. Click Activate device.