Configuring device groups in Clearance - Clearance

Genetec Clearance™ User Guide
Product
Clearance
Content type
Guides > User guides
ft:locale
en-US
Last updated
2025-02-27

Configure device groups to bulk-control firmware versions and device settings.

Before you begin

Create a device group.

What you should know

  • Changes to the configurations of a device group control the configurations for all included devices.
  • The setting file is used to bulk-control i-PRO body-worn camera and in-car system configurations made at the device level.
  • You can follow these same steps to configure settings at the device level.

Procedure

  1. From the Device Groups page, select the relevant device group.
  2. Configure device settings for the device group.
  3. Configure the firmware version for the device group.
  4. If you are configuring an in-car system, you can attach cameras to the system by doing the following:
    1. From the in-car system device or device group page, navigate to the Attached cameras section.
    2. Click Add ().
    3. From the Select camera window, select the cameras you want to attach to the in-car system.
    4. Click Save.
  5. Click Save.
Parent topic: About device groups in Clearance