Configuring i-PRO ICV 4000 systems in Clearance - Clearance

Before you can use your i-PRO ICV 4000 in-car system, you must authenticate with Clearance.

1. From the Devices page in Clearance, click Configurations > Devices.
2. Click Create new device.
3. Enter a name for the camera, its serial number, and specify the manufacturer and model.
   
4. Click Save.
   The in-car system is created.

   
5. Log in to the Arbitrator 360 setup tool.
6. To work with Clearance, the ICV4000 must be in UDE mode, rather than UEMS mode. To switch your ICV4000 to UDE mode, do the following:
   1. Click Switch Operational Mode.
      A dialog box opens displaying the following:

      
   2. Click Yes.
   3. Apply your changes.
   4. Restart the ICV 4000 device.
   5. Close the Arbitrator 360 tool and then re-open it.
      NOTE: If your ICV 4000 is already in UDE mode, disregard these steps.
7. In the Config tab of the Arbitrator 360 tool, input your Credentials from Clearance.
   

   NOTE:

   • Ensure that the Verify Server Certification check box is activated.
   • In the CloUDE Password URL field, enter one of the following depending on which address line structure your organization uses to access Clearance:
     • https://www.clearance.network/profile
     • https://us.clearance.network/profile