Genetec Cloudlink 110 DIP switch command codes - Genetec Cloudlink 110

Genetec Cloudlink™ 110 Hardware Installation and User Guide
Product
Cloudlink
Cloudlink 110
Content type
Guides > Installation guides
ft:locale
en-US
Last updated
2024-10-16

By turning the four CODE DIP switches ON or OFF, you can apply a configuration to the Genetec Cloudlink™ 110 appliance.

DIP switch commands

S1 S2 S3 S4 Command description
ON ON ON ON No code:

After running a command code, to avoid an accidental configuration change, set the DIP switches to ON ON ON ON.
ON OFF ON OFF Partial factory reset. This command has the following effects:
  • Deletes user data.
  • Resets default password.
  • Resets appliance configuration, but keeps network configuration.
ON OFF OFF ON Full factory reset. This command has the following effects:
  • Deletes user data.
  • Resets default password.
  • Resets appliance configuration.
Parent topic: Running Genetec Cloudlink 110 DIP switch command codes