The LEDs on the Genetec Cloudlink™ 110 appliance provide visual feedback on system status and operation.
| Group | LED name | LED color | Description |
|---|---|---|---|
| General | Information ( ) |
Orange: solid | Genetec Cloudlink 110 software not started. |
| Green: solid | Genetec Cloudlink 110 software started. | ||
| Green: 2 blinks per second | Connected to Security Center SaaS. | ||
| Green: 5 blinks per second | Software upgrade in progress. IMPORTANT: Don’t
power cycle or power down the appliance while the
Information (
) LED is flashing green. Doing
so might result in serious damage to the
unit. |
||
| Orange: solid 3 seconds | DIP switch code recognized. | ||
| Red: 3 slow blinks | DIP switch code not recognized. | ||
| Power | Blue: solid | ON when 12 V DC or PoE power is applied. | |
| RS-485 | RX | Future use | |
| TX | Future use | ||
| Ethernet ports | 1, 2 | Green | 1000BASE-T link is established. Flashes when there’s activity. |
| Yellow | 10BASE-T or 100BASE-TX link is established. Flashes when there’s activity. | ||
| PoE | Yellow: solid | ON if the Genetec Cloudlink 110 is being powered from a Power over Ethernet (PoE) source connected to Ethernet port 1. |