Genetec Cloudlink 110 buzzer feedback - Genetec Cloudlink 110

Genetec Cloudlink™ 110 Hardware Installation and User Guide

Product
Cloudlink
Cloudlink 110
Content type
Guides > Installation guides
ft:locale
en-US
Last updated
2024-10-16

A buzzer inside the Genetec Cloudlink™ 110 appliance provides audible feedback to communicate system status.

Buzzer tone Description
Low-middle-high tone sequence Genetec Cloudlink 110 firmware is starting up.
High-low tone sequence The appliance is in a warning state.
  1. Verify that the microSD card is inserted properly. For more information, see Installing the Genetec Cloudlink 110 microSD card.
  2. If the warning state persists, restart the appliance.
  3. If the warning state persists, contact Genetec™ Technical Support.