Installing the Genetec Cloudlink 110 microSD card - For the Genetec Cloudlink™ 110 to operate, the microSD card that was shipped with the appliance must be installed. - Genetec Cloudlink 110

Genetec Cloudlink™ 110 Hardware Installation and User Guide
Product
Cloudlink
Cloudlink 110
Content type
Guides > Installation guides
ft:locale
en-US
Last updated
2025-03-24

For the Genetec Cloudlink™ 110 to operate, the microSD card that was shipped with the appliance must be installed.

Before you begin

Check your appliance to determine if the card is pre-installed. If the card isn’t pre-installed, locate the small black box inside the main packaging that contains the microSD card, and use the following information to install the card.

What you should know

IMPORTANT:
  • Install the microSD card before connecting power to the appliance.
  • You can only use the microSD card that was shipped with the appliance.

Procedure

Rotate the microSD card so that the metal contacts are on the bottom and insert the card into the microSD slot. Push until you hear a click.
Inserting the microSD card in the Genetec™ Clouldlink™ 110.