The Genetec Cloudlink™ 110 is a compact cloud-managed appliance that serves as a versatile video bridge. It integrates diverse video edge devices, streamlining operations and reducing hardware requirements. With its on-board storage and processing capabilities, the 110 optimizes resources for small deployments, ensuring efficient data management.
| Hardware feature | What you should know | |
|---|---|---|
| A | RS-485 ports | Future use. |
| B | MicroSD card | MicroSD card-based storage. For more information, see Installing the Genetec Cloudlink 110 microSD card. |
| C | Ethernet ports | Two Ethernet ports are provided for connection to the IP network. NOTE: Ethernet port 1 can be used to power the appliance using
Power over Ethernet (PoE). For more information, see Genetec Cloudlink 110 connections.
|
| D | Mounting holes | You can either mount the appliance to a suitable surface using the mounting holes or to a DIN rail using the optional DIN rail mounting bracket. For more information, see Mounting the Genetec Cloudlink 110 appliance. |
| E | Power | Connect the appliance to a 12 V dc (nominal) power supply. For more information, see Genetec Cloudlink 110 power supply requirements. |
| F | Information ( ) LED |
The LED provides feedback on system status. For more information, see Genetec Cloudlink 110 LED feedback. |
| G | Command code DIP switches | The four CODE DIP switches allow you to run commands, which can, for example, reset certain appliance configurations. For more information, see Genetec Cloudlink 110 DIP switch command codes. |
| H | Monitoring inputs | Future use. |