As of version 1.13.0, the Genetec Cloudlink™ 210 firmware includes the following known issues.
| Issue | First reported in | Description |
|---|---|---|
| 259984 | 1.11.0 | RS-485 ports on the Cloudlink 210 are disabled. These ports can't be configured or used. |
| 259995 | 1.11.0 | Supervised inputs on the Cloudlink 210 are disabled. These ports can't be configured or used. |
| 352666 | 1.11.0 | Output relay ports on the Cloudlink 210 are disabled. These ports can't be configured or used. |
| 361972 | 1.11.0 | The Cloudlink 210 doesn't reboot after updating the hostname and then switching
between static IP and DHCP, causing the hostname change to not be applied
successfully. Workaround: Reboot the appliance
manually or update the hostname without changing other network
settings.
|
| 437717 | 1.12.0 | In rare cases, the appliance reboots automatically shortly after startup. Workaround: None.
|
| 451753 | 1.12.0 | IPv6 is currently unsupported. Workaround: None.
|
| 487365 | 1.13.0 | In isolated network mode, assigning the same subnet to LAN1 and LAN2 with DHCP
enabled might disrupt connectivity and device discovery. Workaround: Use different subnets for LAN1 and LAN2.
|