As the Genetec Mission Control™ incident owner, you can show the progress of your incident resolution to other users by changing the incident state.
Before you begin
In the Incident monitoring task, do one of the following:
- Right-click an incident in the list.
- Right-click an incident on the map.
- If the incident is selected, click the Actions button () at the bottom of the dashboard.
- In the contextual menu, click Change state to....
Select one of the states from the list.
The predefined incident states are:
- The incident has just been triggered and no activity is recorded. If using the default settings, you can change a new incident to In progress or Closed.
- In progress
- Actions are being taken for this incident. If using the default settings, you can change an incident from In progress to any other state.
- On hold
- The incident is paused. You might do this if, for example, higher priority incident requires your attention, or if you are waiting for external information before moving forward with the procedure. When changing the state of an incident to On hold, indicate for how long you want to pause the incident and click Apply. The incident reverts to its original state as soon as the hold time expires. If using the default settings, you can change an incident from On hold to any other state.
- The situation is resolved and ready to be closed. If using the default settings, you
must complete all the steps in the standard operating procedure (SOP) before you can
set an incident to Resolved. You can change the incident from Resolved
to any other state.
You need the Forcibly resolve incidents with incomplete SOPs privilege to resolve incidents without completing all the steps in the SOP.
- Everything that needs to be done for this incident has been done. If using the
default settings, you must first resolve an incident before you can close it. After an
incident is closed, you can no longer make any changes to the incident. A closed incident is removed from the Incident
monitoring task, but all information remains available in the system
for auditing, investigation, and analysis.
You need the Forcibly close unresolved incidents privilege to close unresolved incidents.
If you are ready to change the state to Resolved but not all SOP steps have been
completed, click one of the following:
- Complete SOP and resolve
- Completes the remaining steps before changing the incident state. Depending on your system configuration and the incident type, you might not have the privileges to do this.
- Changes the incident state without completing the remaining steps. Depending on your system configuration and the incident type, you may not have the privileges to do this.
- Remains in its current state.