The following software issues are resolved in Genetec Patroller™ 6.6.1.
| Issue | First reported in | Description |
|---|---|---|
| 2973973 | 6.6.0 | If patrol vehicles using Plate link are running different BeNomad map engine
versions, upper-case and lower-case character differences are not recognized as
being the same street. NOTE: Ensure that vehicles using Plate link are running the
same map engine version. If using BeNomad, ensure the .glic file version matches,
for example, Genetec_NAM-CAN-USA-MEX_NT_2020.2.glic.
|
| 2934025 | 6.6.0 | When a system running Genetec Patroller™ 6.6 in Curb Sense™ mode is connected to a SharpZ3 system running SharpOS 13.4, the Genetec Patroller™ clock and the GNSS clock are sometimes offset causing bad timing/delays with overview images. |
| 2911680 | 6.6.0 | Updates to the MatcherSettings.xml file are not picked up by Genetec Patroller™. To resolve this issue, the system should automatically send the MatcherSettings.xml file to the correct local Genetec Patroller™ folder if the file is saved to C:\Genetec\AutoVu\RootFolder\ManualTransfer\General. |
| 2899838 | 6.6.0 | The SharpZ3 camera appears offline in Genetec Patroller™ but can still stream video to Genetec Patroller™. |
| 2827986 | 6.6.0 | The number of license plate reads shown in the Genetec Patroller™ Offload window does not match the number of reads received in the Security Center Reads task. |
| 2821263 | 6.6.0 | When the first character of a license plate is a number, Genetec Patroller™ converts the number to an underscore character. For example, the plate 7ABC123 is converted to _ABC123. |
| 2802227 | 6.6.0 | After upgrading the SharpZ3 system from SharpOS 13.3.1.12 to SharpOS 13.4.0.175, the following error is logged: Patroller Database Problem writing new data into database. |
| 2802226 | 6.6.0 | Genetec Patroller™ can sometimes lose connection to Security Center. The globe icon blinks red/green, then stays red. |
| 2802197 | 6.6.0 | After Genetec Patroller™ successfully sends evidence to Curb Sense™, Genetec Patroller™ can sometimes try to resend the evidence. |
| 2767067 | 6.6.0 | When both permits and overtime are selected in Genetec Patroller™, the system does not register reads downloaded from Plate link and overtime hits are not generated. |
| 2761808 | 6.6.0 | If many permits are associated with a permit restriction, hit detection can be delayed. |
| 2758467 | 6.6.0 | When the Allow popup hit feature is enabled, hits are accumulated in the background, but are not displayed in Genetec Patroller™. |
| 2737957 | 6.6.0 | When overview images from additional context cameras are sent from Genetec Patroller™ to Curb Sense™, the bottom of the images are cropped. |