XML tags are defined to exchange different type of information with the Genetec Patroller™ Simple Host service.
The following table describes the Simple Host tags:
| Tag Name | Description |
|---|---|
| Address | Address where the vehicle read occurred. This field is calculated using the GPS coordinates. The application will not be able to calculate an address for all GPS coordinates. |
| AddNewWanted | Adds a license plate to Genetec Patroller’s local hotlist file on the in-vehicle computer. |
| Attributes | List of attributes of a vehicle read (if within Vehicle or Vehicle2 tag) or a hit (if within a Hit tag). |
| AutoVuReturn | Root tag used by the Simple Host Service. |
| CameraName | Name of the camera that took the image. |
| Data | 64-bit encoded image data. Approximately 2 KB for a ALPR image and 50 KB for a context image. |
| FromStreet | Last perpendicular street. Useful to find the block where the address is located. |
| Heading | Angle. Direction of the unit taking the reads. |
| Hit | Contains all the information about a hit. |
| HitID | Identifier of the hit. |
| HitType | Type of the hit. Overtime, Permit or Hotlist. |
| Image | Contains the following information about the image <Purpose>, <CameraName> and <Data>. |
| Latitude | GPS coordinate of the vehicle read. |
| Location | Contains information about the vehicle read location and address. |
| Longitude | GPS coordinate of the vehicle read. |
| NumberOfViolations | (Overtime hits only) A zone can give more than one hit to a parked car. This field contains the number of hits a vehicle can incur in the current zone. |
| PlateNumber | Plate number of the vehicle read. |
| Purpose | Purpose of the image. Can have the following values: ALPR, Context, Tire, and Overview. |
| ReadType | The type of the read based on a set of binary flags since more than one hit type can be activated at a time. Standard (Hotlist) = 1, Permit=2, Overtime=4. Example: Standard + Overtime = 5. |
| TimeStamp | Date and time at which the read was done. |
| ToStreet | Next perpendicular street. Useful to find the block where the address is located. |
| UnitName | Name/identifier of the vehicle running the application. |
| UserName | Name/identifier of the user connected to the application. |
| Vehicle | (Overtime enforcement only) Contains all the information about the second plate
read in an overtime enforcement scenario.
NOTE: An overtime hit is the result of two plate reads, the second
read triggering the hit.
|
| Vehicle2 | (Overtime enforcement only) References all the information about the first plate read in an overtime enforcement scenario. The Vehicle tag contains all the information about the second vehicle read (which triggers the hit). |
| VehicletagOvertimeGUID | (Internal use) GUID of the second vehicle. |
| ZoneColor | Color of the Zone. Used in the map display in BackOffice and Genetec Patroller™. |
| ZoneName | Name of the zone that was activated at the time of the vehicle read. |