Satel intrusion panels - Genetec™ Intrusion Protocol 5.0.0

Genetec™ Intrusion Protocol Extension Guide 5.0.0

Applies to
Genetec™ Intrusion Protocol 5.0.0
Last updated
2023-08-04
Content type
Guides > Plugin and extension guides
Language
English
Product
Genetec™ Intrusion Protocol
Version
5.0

Using the Genetec™ Intrusion Protocol extension, you can addSecurity Center cardholders to a Satel intrusion panel.

Procedure

  1. From the Config Tool home page, open the Intrusion detection task.
  2. From the entity browser, select an intrusion panel and click the Users tab.
  3. Click one of the following:
    • Add user
    • Add user group
  4. Configure the following:
    User
    Select a user from the list. This list is displayed when you are adding a user.
    User group
    Select a user group from the list. This list is displayed when you are adding a user group.
    User type
    The user type, as defined on the Satel panel. For a list of user types, consult your Satel documentation.
    User time
    Allows users to create or change time.
    User temporary time
    Allows users to create or change temporary time.
    Simple user
    A user who can arm and disarm areas.
    Master
    A user that has access to the menu functions which are reserved for the administrator.
    Authorized areas
    Enter a 1 in the field of each area that the cardholder requires access to.
    Isolate inputs
    Allows users to isolate areas.
    Arm
    Allows users to arm areas.
    Disarm
    Allows users to disarm areas.
    Clear area alarms
    Allows users to clear alarms on areas.
    Clear object alarms
    Allows users to clear object alarms.
    Clear all alarms
    Allows users to clear all alarms.
    Defer alarm arming
    Allows users to defer alarm arming.
    Change code
    Allows users to change the access code to a zone.
    Edit users
    Allows the user to edit the users in relation to who they rank above.
    Bypass inputs
    Allows users to bypass inputs that are in an alarm states when arming an area.
    Set clock
    Allows users to program the clock on the intrusion panel.
    View trouble state
    Allows users to view areas that are in a trouble state.
    View events
    Allows users to view events related to the intrusion panel.
    Reset inputs
    Allows users to reset the inputs on an intrusion panel.
    Configure options
    Allows users to configure an intrusion panel.
    Tests
    Allows users to conduct tests on an intrusion panel.
    Downloading
    Allows users to conduct downloading functions on an intrusion panel. For a list of functions, consult your Satel documentation.
    Can always disarm
    Allows users to disarm a panel regardless of schedules.
    Clear voice messages
    Allows users to clear voice messages on a panel.
    Use GUARDX
    Allows users to use the Satel GUARDX program.
    Access temporarily blocked areas
    Allows users to access an area that has been temporarily blocked.
    Enter first code
    Allows users to initiate arming of areas that require entering two codes.
    Enter second code
    Allows users to enter the second code when arming areas that require entering two codes.
    Control outputs
    Allows users to control outputs.
    Clear latched outputs
    Allows users to clear latched outputs.
    NOTE: These settings are related directly to settings on Satel intrusion panels. For more information, consult your Satel documentation.
  5. Click Save, and then click Apply.