SharpV G3 cameras must be powered using Power Source Equipment (PSE) compliant with standard IEEE 802.3bt. This type of PSE is also known as a PoE++ source and can deliver up to 60 W of power per port.
NOTE:
- Some PSEs are advertised as UltraPoE with 60 W of power available, but this doesn’t imply that the PSE is 802.3bt-compliant. The SharpV can’t negotiate successful power delivery with non-802.3bt PSEs, even if they are able to provide 60 W of power.
- The following hardware recommendations are for SharpV G3 units, but they are also acceptable for SharpV G1 and SharpV G2 units. For the specific network cable power requirements for SharpV G1 and SharpV G2 units, see the user guide associated with your Sharp OS release on the TechDoc Hub.
| Average consumption | 27 W |
| Peak consumption | 40 W |
Recommended PoE injectors
The specifications of the following PoE injectors fit the requirements of the SharpV unit. The injectors have been used successfully in the field to power SharpV units.
IMPORTANT:
- We don't officially endorse or promote these products. This information is provided based on reported experiences and the manufacturer's published technical specifications. This information is intended to help system integrators and end users to find a suitable SharpV power source. If the listed products experience reliability issues, either due to a design change or a manufacturing defect, we can’t be held responsible for the recommendations in this document, which are provided in good faith and based on the information available at the time of publication.
- The installer is responsible for verifying that the device is compliant with local regulations.
- The installer is responsible for verifying that the device's electrical and environmental specifications are respected.
Microchip PD-9501GCO
| Manufacturer | Microchip (www.microchip.com) |
| Model | PD-9501GCO |
| Mounting method | Mounting ears or pole mount* |
| Operating temperature | -40⁰C to +65⁰C (-40⁰F to +149⁰F) |
| Weather rating | IP67 (NEMA enclosure not required) |
* Requires the Microchip PD-OUT/MBK/ET outdoor mounting bracket.
Phihong POE60U-1BTE-R
| Manufacturer | Phihong (www.phihong.com) |
| Model |
|
| Mounting method | Tabletop or mounting ears on two opposite corners (wall or surface mount). |
| Operating temperature | -10°C to +60°C (14°F to 140°F) |
| Weather rating | This is an indoor device. If outdoor installation is required, the device must be installed inside a protective NEMA 4X enclosure. |
Trendnet TPE-119GI
| Manufacturer | Trendnet (www.trendnet.com) |
| Model | TPE-119GI |
| Mounting method |
|
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Weather rating | This is an indoor device. If outdoor installation is required, the device must be installed inside a protective NEMA 4X enclosure. |