You can enable the maintenance mode for all Industrial
IoT devices in Security
Desk and Config
Tool.
Before you begin
Make sure you have
Security Center 5.10.3.0
installed on your system. For more information see
Security Center Installation and Upgrade Guide
5.10.3.0.
Procedure
To enable the maintenance mode in Config
Tool:
-
From the Config
Tool home page,
open the Plugins task.
-
Expand the Industrial
IoT plugin from the
entity browser.
-
Right-click the desired device, and select .
-
In the Maintenance mode dialog box configure the
following:
-
Click Turn ON to enable the maintenance
mode.
-
Select one of the three options based on your requirement:
- Manually
- With this option, you must turn the maintenance mode off
manually.
- Duration
- With this option, you can configure the desired number of
days for the maintenance mode to be disabled
automatically.
- Specific end time
- With this option, you can configure the specific date and
time for the maintenance mode to be disabled
automatically.
-
(Optional) Enter a reason for enabling the maintenance mode.
-
Click Save.
Maintenance mode is now enabled on the selected
device.
To enable Maintenance mode in Security
Desk:
-
From the Security
Desk home page,
open the Monitoring task.
-
Expand the Industrial
IoT from the entity
browser.
-
Right-click the desired device, select Maintenance mode
and continue from Step 4.
Maintenance mode is now enabled on the selected
device.