Creating rules based on events and arguments - Industrial IoT 5.2.3.0 | BACnet | Modbus | OPC Client | SNMP Manager

For a device or entity to automatically perform an action when data point event, with or without arguments, occurs, you can create a rule in Security Center.

1. From the Config Tool homepage, open the Plugins task.
2. From the entity browser, select the Industrial IoT plugin role and click the Rules tab.
3. In the Rules section, click Add a rule ().
4. In the Information section, enter a name and description.
5. In the Conditions section, select On event from the Condition list and provide the following information:

   Select a source type

   Select whether the rule applies to a device, device type, entity, or entity type. Selecting a device or entity type means that the rule applies to all devices or entities that inherit the properties of that type.

   Select a source

   Based on the selected source type, select a specific device, device type, entity, or entity type to which the rule applies.

   Select an event

   Select the device event that the rule applies to.

   Always trigger

   If selected, the actions are executed each time an event is received and the condition involving the argument is true. If it is not selected, the actions are executed only if the condition is true for the current event and it was false for the previous event.

6. (Optional) To add an argument to the rule, click Add an argument (), and select an argument, an operator, and a value.
7. In the Actions section, select the action that you want to occur when the condition is met.
   The action can be one of the following:

   Raise an event

   Raise the custom event you select.

   Trigger an alarm

   Trigger the alarm you select.

   If you added an argument to your event, the Auto-acknowledge option would also be available. Select this option if you want the system to automatically acknowledge the alarm when the condition that triggered the rule is no longer true.

   Change the state

   Change the state of the device to the state you select.

   Write on a data point

   Write a specified value to the data point you select.

8. (Optional) To add more actions to the rule, click Add action () and configure the action.
9. Click Apply.

Example

Suppose someone has been vaping inside the office, you can create a rule for all your sensors to trigger a custom event, and trigger the alarm every time.