Configuring the Industrial Protocol Interface plugin role - Industrial Protocol Interface 3.1.0

Industrial Protocol Interface Plugin Guide 3.1.0

Applies to
Industrial Protocol Interface 3.1.0
Last updated
2023-02-10
Content type
Guides > Plugin and extension guides
Language
English
Product
Industrial Protocol Interface
Version
3.1

You must configure the plugin role configuration to match your needs, whether you are exposing Security Center events and objects through the BACnet protocol or forwarding SNMP traps.

What you should know

The first time the plugin role is activated, it creates the Read-only data points, Events and Protocols pages in your system.

Procedure

  1. From the Config Tool home page, open the Plugins task.
  2. In the Plugins task, select the plugin role from the entity browser, and then click the Protocols tab.
  3. If you are using the BACnet protocol, click the BACnet tab and configure the following properties:
    Device name
    The name you want Security Center to be listed as in the BACnet client. The default is Genetec Security Center.
    Device instance number
    The instance number for Security Center. This number must be unique throughout the sub network.
  4. If you are using SNMP, click the SNMP tab and configure the following properties:
    Version
    The SNMP version you want to use.
    • V2 is an unsecured version. It enables the Community field, which is where you add the community name you want to use. This field cannot be left blank. The default value is Public.
    • V3 is a secured version. It enables the Username field, as well as options and password fields for the Authentication and Privacy protocols.
      • The available authentication protocols are None, MD5, or SHA1.
      • The available privacy protocols are None, DES, or AES.
    The SNMP V3 protocol properties.
    Manager IP
    The address of the SNMP manager that receives the traps. The default is 127.0.0.1.
    Manager port
    The SNMP manager UDP port that receives the traps. The default is 162.
  5. Click Apply.