Configuring privacy protection output stream settings - KiwiVision™ 4.7.1 | Security Center 5.11.2.0

To control resource usage of privacy protection, you can customize the output stream settings.

1. In the Privacy protection page of the camera, click Show output stream settings.
   The output stream settings are displayed.

   
2. Configure the output stream settings as required:

   Encoding

   The codec that is used to encode the privacy-protected stream.

   Maximum resolution

   Sets the maximum resolution of the encoded stream.

   Key frame interval

   Sets the key frame interval, in seconds, between two key frames. Values range from 1 - 20 seconds.

   Frame rate

   Limits the maximum number of frames per second (fps). You can specify the frame rate in the range of 1 - 30 fps.

   Bit rate

   Set the target image quality or maximum bit rate depending on the setting selected in the Priority field. If the resolution or frame rate in the original stream is lower, then that lower value is used.

   Priority

   Select one of the following:

   Image quality

   Maintains the image quality at the expense of the bit rate.

   Constant bit rate

   Maintains the bit rate at the expense of image quality.

3. Click Apply.