You can define areas in the video to trigger events when a person is detected in those areas.
What you should know
- In intrusion detection scenarios, an area is an alarm region. You can define multiple areas in a scenario to monitor for intrusion. Settings are configured per area.
- You can enable the Show movement grid option to visualize the sensitivity of your configuration. This option displays the analysis blocks that make up an area in different colors to show when they are active, and when the velocity, path deviation, and travel distance is properly detected.
NOTE: Depending on which type of scenario you are configuring, some settings might be unavailable or hidden if Advanced mode is disabled. When Advanced mode is enabled, the advanced settings are displayed in bold.
- From the Config Tool home page, open the Video task.
- From the area view, select a camera that you applied an analytics scenario to.
- Click the Video analytics tab, and then click the scenario you want to configure.
Click the Areas tab.
Define the area as required:
- Click and drag the area to move it to the location you want.
- Click and drag the white dots to adjust the shape and size of the area.
(Optional) Add or remove areas.
- Add areas ()
- Remove the selected area or the selected point ()NOTE: When an area or point is selected, it is yellow.
- In the Area name field, rename the selected area.
In the Tracking section, configure the following
- Min. speed
- The minimum speed at which an object or person must travel to
trigger an alert.NOTE: The velocity estimation is based on the configured perspective and depends on the accuracy of the configuration.
- Max. speed
- The maximum speed at which an object or person must travel to trigger an alert. When this maximum speed is exceeded, no alert is triggered. This option can be used to ignore fast moving objects, such as trains.
- Min travel distance
- The minimum distance that an object or person must travel to
trigger an alert.
value can help minimize false alerts on small movement, such as trees moving in the
wind.NOTE: The distance is estimated based on the configured perspective, which might result in inaccuracies.
In the Alert section, configure the following
- Min. time between alerts
- The minimum period between alerts that can be triggered for an area. Using a low value ensures that multiple alerts that are part of a single real-life event are captured. Using a high value might suppress valid alerts that occur quickly after one another.
- Alert activation time
- The period for which a detection must remain in an alarm region before it can trigger an alert. Using a high value filters out camera noise, but might result in missed alerts.
- Min. detection size
- Specifies how much of the detected object has to be active in the alarm region to trigger an alert. Using a low value might cause small motion patterns, such as animals to be detected. Using a high value can result in missed detections of people or objects.
- Detect all active blocks
- When this option is selected, active blocks anywhere in the defined area can trigger alerts.
- Detect only connected blocks
- When this option is selected, only active blocks that are adjacent to each other can trigger alerts. This option minimizes false alerts caused by scattered movement, such as camera noise.
- Click Apply.
For an alert to be triggered, a person or object must do the following:
- Travel at a speed between the configured Min. speed and Max. speed.
- Travel at least the Min. travel distance.
- Travel within the Max. deviation angle along the defined path.
- Travel for at least the period specified for the Alert activation time.