The following issues are resolved in Mercury controller firmware 2.1.0.
NOTE: This document lists only the resolved issues relevant to the Mercury integration with
Synergis™ Softwire.
| Mercury issue | Description |
|---|---|
| SD-4421 | Resolved an issue where not all cards were deleted after using the 343 command. |
| SD-4412 | Resolved an issue where OSDP file transfer was failing via the web page. |
| SD-4411 | Resolved an issue where the fifth OSDP file transferred was failing. |
| SD-3891 | Resolved an issue where 802.1X was not using the latest TLS version. |
| SD-3581 | Resolved an issue where 24 hour time for LCD displays on ACRs was not displaying properly. |
| SD-3570 | Resolved an issue where the reader did not beep when the double card mode was enabled and a second card was used. |
| SD-3498 | Resolved an issue with linking the Office Mode IPB when using IPB on Mercury hardware. |
| SD-3487 | Resolved an issue where web page usernames were not being accepted if the word "admin" was in the username. |
| SD-3266 | Resolved an issue where setting a static IP address via the 902 command was not using the provided hostname. |
| SD-3053 | Resolved an issue where the NTP time was not successfully updating time when using a hostname for time server. |
| SD-2695 | Resolved an issue where ACR_F_QEXIT was not being honored if the ACR was also configured for ACR_FE_REX_HOLD and the door was open. |
| SD-999 | Resolved an issue where the 903 and 904 commands could result in the web UI being out of sync. |