To set up the OPC
Server plugin and enable users to monitor Security
Center entities on OPC Clients, you must create the OPC Server and configure its connection parameters.
What you should know
Only specific configuration settings are described here. Only specific configuration settings are described here. For more information about generic Config
Tool settings, such as the Identity settings, see Common configuration tabs.
Procedure
-
From the Config
Tool home page,
open the Plugins task.
-
Select the OPC
Server plugin from the entity browser, and click the OPC Server configuration tab.
-
In the Connection information section, enter the following information:
- Server port
- Port number on which the OPC Server is created.
- Username
- Name of the user that the OPC Server uses to connect to Security
Center with.
- Password
- User password that the OPC Server uses to connect to Security
Center with.
-
If you have a Local Discovery Server installed, register the OPC Server with the LDS as follows:
-
In the Discovery section, set the Discovery Server registration option to ON.
-
In the Directory Server URL option, enter the IP address and port of the LDS.
-
Click Apply.
Results
The OPC Server is created, and is connected to
Security
Center. The
Server status changes from
Not connected to
Ready.