After you configure the OPC Server plugin in Security Center, you can connect to an OPC Client and validate your OPC Server integration.
Procedure
- Connect to an OPC Client, and make sure that you have a valid client certificate.
-
Connect your OPC Client to the OPC Server, by doing one of the following:
- If an LDS is installed on the computer where the OPC Server plugin is installed, connect using the LDS.NOTE: The OPC Server must be registered with the LDS in Config Tool.
- Auto-discover the OPC Server if it is using the default port 4840.
- Enter the specific IP address and port number of the OPC Server.
- If an LDS is installed on the computer where the OPC Server plugin is installed, connect using the LDS.
- In the OPC Client, trust the OPC Server certificate.
- In Config Tool, trust the OPC Client certificate.
- In the OPC Client, make sure that you can see the Security Center entities you exposed as OPC objects.