Adding your Avon Communications radars as tracking systems to Security Center - Restricted Security Area Surveillance 4.2

RSA Surveillance Integration Guide for Avon Communications Radar Systems

Applies to
Restricted Security Area Surveillance 4.2
Last updated
2022-10-28
Content type
Guides > Plugin and extension guides
Language
English
Product
Restricted Security Area Surveillance
Version
4.2

Before you can monitor the restricted areas secured by your Avon Communications radar system in Security Center, you must add each Avon Communications radar as a tracking system in Config Tool.

Before you begin

Procedure

  1. From the Config Tool homepage, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
    The Add tracking system wizard opens.
  3. On the Tracking system information page, enter the following information:
    Type
    Select Avon.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    Multicast IP address
    Enter the UDP multicast IP address of the radar.
    Port
    The port that the plugin and the radar use to communicate.
  5. Click Refresh connection status () to connect.
  6. When the connection status turns Online (), click Next page ().
  7. On the RSA configuration page, enter the following information:
    Events
    Turn on the custom events that you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
  8. Click Finish.
    The Avon Communications radar and its devices are listed in the Area view entity tree.

After you finish

Create RSA zones.