To prepare your DEA Security
devices for integration with Security Center, you must configure the DEA Security system to communicate with the Genetecâ„¢ Restricted Security
Area Surveillance (RSA Surveillance) plugin. For specific details about configuring your
devices and software, refer to the DEA Security
documentation.
Before you begin
- Make sure that your DEA Security system is operating as per the
manufacturer's specifications.
-
Make sure that your DEA Security devices and software are compatible with the RSA Surveillance plugin. For the latest compatibility
information, see Supported plugins in Security Center on the
Genetec TechDoc Hub.
What you should know
This task describes in a general way how the
DEA Security system needs to be configured for it to communicate
with the plugin. For specific details about the configuration of your devices and
software, refer to the DEA Security documentation.
Procedure
-
Deploy and configure the DEA Security system as described in the
DEA Security documentation.
-
Define the following to allow the DEA Security system to
communicate with RSA:
- The IP address of the server hosting the RSA Surveillance role.
- The user name and password used to connect to the RSA Surveillance plugin.
You need this information later to add the tracking system to Security Center.
-
Open the required ports depending on your configuration.
The default ports are 8889 TCP and 8890 UDP.