Adding your SightLogix cameras as tracking systems to Security Center - Restricted Security Area Surveillance

RSA Surveillance Integration Guide for SightLogix Systems

Restricted Security Area Surveillance
Content type
Guides > Integration guides
Guides > Plugin and extension guides
Last updated

To monitor the restricted areas secured by your SightLogix cameras in Security Center, you must first add each camera to a driver container in the Inter-System Gateway (IS Gateway). Then, you need to add the driver container as a tracking system to Config Tool.

Before you begin


  1. Log on to the IS Gateway web portal:
    1. Open a web browser and enter the URL https://<GatewayServer>:4242.
      <GatewayServer> is the name or IP address of the server hosting the IS Gateway service. The default port is 4242. Use the port you configured at installation.
    2. Accept the security certificate.
    3. On the logon page, enter the Username and Password and click Sign in.
      The username and password were assigned during the Inter-System Gateway Configuration step of the IS Gateway service installation.
  2. Add a driver container for the tracking system that you want to add to Security Center:
    1. On the homepage of the IS Gateway, click the Container () tab.
    2. Click the button besides the docker engine label, and then click Add driver container.
    3. In the Add Driver Container window that opens, enter the following information:
      IS Gateway web portal - Add Driver Container dialog box.
      Select the driver that you want to install.
      Select the driver version that you want. The latest version is selected by default.
      Label used to identify this driver container in the list of containers on the left.
      Port used to communicate with the driver.
      Network adapter
      Select the network adapter used by the driver to communicate with the IS Gateway service.
      Show advanced
      Some drivers require other communication ports to be open. If necessary, click here to add those ports.
    4. Click Add.
      The IS Gateway immediately downloads the required driver container image from the repository. A notification is shown in the upper right corner of the browser page during the download process.
      New driver creation notification in the IS Gateway web portal.

      After the download completes, the new driver container is displayed in the list of containers on the left, under the selected docker engine.

      IS Gateway web portal showing a new driver container.
    5. Start the driver container. To do so, click the button beside the driver container label and click Start.
    NOTE: If you are adding multiple driver containers, make sure that each driver container has a unique port number. This will prevent any port conflicts if multiple driver containers are running at the same time.
  3. Select the driver container corresponding to the tracking system that you want to add to Security Center.
  4. In the Communication section, click Add ().
    IS Gateway web portal - Communication section for adding devices.
  5. In the Add/Edit device window that opens, enter the following information:
    IS Gateway web portal - Add/Edit device dialog box for SightLogix devices.
    Enter a unique name for this device.
    Enter the IP address of the device.
    Username and Password
    The login credentials for remote access to the device.
  6. Click OK.
    The SightLogix camera is listed in the Communication section.
  7. Add your driver container as a tracking system to Security Center:
    1. From the Config Tool homepage, open the Plugins task.
    2. From the entity tree, select the Restricted Security Area Surveillance plugin role.
    3. Click Add an entity (), and select Tracking system.
      The Add tracking system dialog box opens.
    4. From the Type drop-down, select Inter-System Gateway.
    5. In the Name field, enter a name for your tracking system.
    6. From the Model drop-down, select the driver container you are adding and click Next ().
    7. If applicable, configure the specific settings for your driver and click Next ().
    8. If applicable, import the map from the third-party application and click Finish.
    9. Open the Area view task.
      After a few seconds, your tracking system () should be added to the area view.

After you finish

Create RSA zones.