Adding your Sysco Neoline server as a tracking system to Security Center - Restricted Security Area Surveillance

Before you can monitor the restricted areas secured by your Sysco Neoline perimeter intrusion detection system in Security Center, you must add each Sysco Neoline server as a tracking system in Config Tool.

1. From the Config Tool homepage, open the Area view task.
2. Click Add an entity (), and then select Tracking system.
   The Add tracking system wizard opens.
3. On the Tracking system information page, enter the following information:

   Type

   Select Sysco NeoLine.

   Name

   Enter a unique name for this tracking system.

4. On the Communication page, enter the following information:

   IP address

   The IP address of the SenseControl Websocket server.

   Port

   The TCP/IP port configured in SenseControl Websocket server use to communicate.

   User and Password

   The login credentials for the tracking system.

5. Click Refresh connection status () to connect.
6. When the connection status turns Online (), click Next page ().
7. On the RSA configuration page, enter the following information:

   Import on map

   Select the map that you want to use to display the devices in Security Center.

   Events

   Turn on the custom events that you want to monitor for this tracking system.

   NOTE: You can modify this later on the Properties page of the tracking system.

   Fence configuration

   Choose the color for the perimeter when its state changes. The available options vary by system.