Adding AXIS D2050-VE radars as tracking systems to Security Center - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
2022-06-27
Content type
Guides > Plugin and extension guides
Language
English (United States)
Product
Restricted Security Area Surveillance
Version
4.2

Before you can monitor the restricted areas secured by your tracking system in Security Center, you must add each device as a tracking system entity in Config Tool.

Before you begin

  • Prepare the Axis radar.
  • Ensure that enough short-range sensor licenses are available in Restricted Security Area Surveillance role > Properties > Licenses.

What you should know

By default, AXIS D2050-VE radars are configured to communicate over TCP/IP port 554.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
    The Add tracking system wizard opens.
  3. On the Tracking system information page, enter the following information:
    Type
    Select AXIS D2050-VE.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    IP address
    The IP address of the radar.
    Port
    The TCP/IP port that the plugin and the radar use to communicate.
    User and Password
    The login credentials for remote access to the radar.
  5. Click Refresh connection status () to connect.
  6. When the connection status turns Online (), click Next page ().
  7. On the RSA configuration page, enter the following information:
    Import on map
    Select the map that you want to use to display the devices in Security Center.
    Events
    Turn on the custom events you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
  8. Click Finish.
    The device is listed in the Area view entity tree.

After you finish

Create RSA zones.