Adding Avon radars as tracking systems to Security Center - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
2022-06-27
Content type
Guides > Plugin and extension guides
Language
English (United States)
Product
Restricted Security Area Surveillance
Version
4.2

To monitor the restricted areas secured by your tracking system in Security Center, you must add the Avon radar device as a tracking system entity using Config Tool.

Before you begin

  • Confirm that the tracking system is configured and functioning properly.
  • Confirm that the plugin role is configured and communicating with the tracking system.
  • Create a georeferenced map in Security Center.

    For more information, see the Security Center Administrator Guide.

  • Ensure that enough radar licenses are available in Restricted Security Area Surveillance role > Properties > Licenses.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
    The Add tracking system wizard opens.
  3. On the Tracking system information page, enter the following information:
    Type
    Select Avon.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    Multicast IP address
    Enter the UDP multicast IP address of the radar.
    Port
    The port that the plugin and the radar use to communicate.
  5. Click Refresh connection status () to connect.
  6. When the connection status turns Online (), click Next page ().
  7. On the RSA configuration page, enter the following information:
    Events
    Turn on the custom events you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
  8. Click Finish.
    The tracking system and its devices are listed in the Area view entity tree.

After you finish

Create RSA zones.