Adding Navtech radars as tracking systems to Security Center - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
2022-06-27
Content type
Guides > Plugin and extension guides
Language
English (United States)
Product
Restricted Security Area Surveillance
Version
4.2

Before you can monitor the restricted areas secured by your tracking system in Security Center, you must add each device as a tracking system entity in Config Tool.

Before you begin

  • Confirm that the tracking system and its radars are configured and functioning properly.
  • (Optional) Position the cameras for each zone so that they have a view of the restricted area and make sure that the cameras are functioning properly.
  • (Optional) Add custom events in Security Center.
  • Create a georeferenced map in Security Center.

    For more information, see the Security Center Administrator Guide.

  • Ensure that enough radar licenses are available in Restricted Security Area Surveillance role > Properties > Licenses.

What you should know

By default, Navtech radars are configured to communicate over TCP/IP port 1100.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
    The Add tracking system wizard opens.
  3. On the Tracking system information page, enter the following information:
    Type
    Select Navtech.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    Server
    Enter the IP address of the server that connects to the tracking devices.
    Port
    The TCP/IP port that the plugin and the radar use to communicate.
  5. Click Refresh connection status () to connect.
  6. When the connection status turns Online (), click Next page ().
  7. On the RSA configuration page, enter the following information:
    Import on map
    Select the map that you want to use to display the devices in Security Center.
    Events
    Turn on the custom events you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
    Auto-tracking
    When the option is turned on, PTZ cameras associated with the zones automatically follow a target as it moves. Leave this option off if you are using the RSA's auto-tracking feature.

Results

The device is listed in the Area view entity tree.

After you finish

Create RSA zones.