Adding SICK lasers as tracking systems in Security Center - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
2022-06-27
Content type
Guides > Plugin and extension guides
Language
English (United States)
Product
Restricted Security Area Surveillance
Version
4.2

Before you can monitor the restricted areas secured by your lasers in Security Center, you must add each SICK laser as a tracking system in Config Tool.

Before you begin

  • Prepare the SICK laser.
  • Ensure that enough laser licenses are available in Restricted Security Area Surveillance role > Properties > Licenses.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
    The Add tracking system wizard opens.
  3. On the Tracking system information page, enter the following information:
    Type
    Select SICK.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    IP address
    The IP address of the laser.
  5. Click Refresh connection status () to connect.
  6. When the connection status turns Online (), click Next page ().
  7. On the RSA configuration page, enter the following information:
    Events
    Turn on the custom events you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
  8. Click Finish.
    The device is listed in the Area view entity tree.

After you finish

Create RSA zones.