Configuring an EPSI tracking system for integration with Security Center - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
2022-06-27
Content type
Guides > Plugin and extension guides
Language
English (United States)
Product
Restricted Security Area Surveillance
Version
4.2

To prepare your EPSI radar systems for integration with Security Center, you must make sure that specific settings are configured.

Before you begin

  • Make sure your EPSI server and connected radars are operating as expected.
  • Make sure the EPSI server and software are compatible with the plugin.

What you should know

This task describes in a general way how the EPSI radar system needs to be configured for it to communicate with the plugin. For specific details about the configuration of your devices and software, refer to your manufacturer's documentation.

Procedure

  1. Make sure that the radar is configured in the EPSI server and is operating as expected.
  2. If your organization's network security policies require the IP devices, routers, and switches in your network to block unused ports, then make sure to open the TCP port that the RSA Surveillance plugin and the PSR-500 server use to communicate.
  3. Create a administrator-level user account in the EPSI server for the plugin to use to connect.
  4. (Optional) Create zones in the EPSI server. The plugin will import these zones into Security Center.
  5. Take note of the following information, which you will need later to configure the plugin.
    • IP address of the server that hosts EPSI server.
    • TCP port used to communicate with the plugin.
    • User name and password for the administrator-level user account you created earlier.