Configuring the SpotterRF push script - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
Content type
Guides > Plugin and extension guides
English (United States)
Restricted Security Area Surveillance

The SpotterRF NetworkedIO application must be configured to push data to Security Center using an action script called Push Spotter tracks.json.


  1. Log on to the NetworkedIO application.
  2. Create an action script:
    1. Go to Actions in the sidebar, and then click the plus sign at the top right of that menu.
    2. In Script, enter the name Genetec.
    3. In Type, select Script.
    4. In the Settings section, from the Script list, select Push radar tracks.json.
    5. In Host, enter the IP address of the Security Center expansion server that runs the RSA Surveillance plugin.
    6. In Port, enter the listening port number for the RSA Surveillance HTTP server.
    7. In Path, enter /tracks.
    8. In Username, enter the username configured for this SpotterRF tracking system.
    9. Click Add.
    10. Click Save.
  3. Configure the action for the SpotterRF default zone.
    1. Select the zone option in the sidebar menu, and then select the zone that the action should be added to.
    2. From the Actions list, select the plus sign to add an action.
    3. Under Type, select Push radar tracks.json.
    4. Click Add.
    5. Click Save.