Preparing OPTEX Redscan Pro lasers for integration with Security Center - Restricted Security Area Surveillance 4.2

Restricted Security Area Surveillance Plugin Guide 4.2

Applies to
Restricted Security Area Surveillance 4.2
Last updated
Content type
Guides > Plugin and extension guides
English (United States)
Restricted Security Area Surveillance

To prepare your OPTEX Redscan Pro lasers for integration with Security Center, you must configure specific settings.

Before you begin

Preparing your tracking system is part of the larger integration process. Follow the steps before and after step Prepare Security Center in the Integration overview for the RSA Surveillance plugin.

What you should know

If the user interface described in this topic differs from what you have, ensure that you are running a compatible version of the software.


  1. From a web browser, log onto the OPTEX laser's configuration web page using the laser's IP address and user credentials.
  2. Click Settings > Detection Range, and make sure that the Tilt direction is set to either Horizontal or Vertical.
    The value must not be set to automatic.
  3. Click Security > HTTPS, and then set the Connection method to HTTP & HTTPS or HTTPS.
    NOTE: To learn how to create a certificate, see the manufacturer documentation.
  4. Click Information > Installation information, and then set Latitude, Longitude, and Direction.
    The direction is the clockwise orientation angle from the north.