Connecting the SALTO Virtual Network plugin role to the SALTO SHIP server - SALTO Virtual Network 3.3.0

SALTO Virtual Network (SVN) Plugin Guide 3.3.0
Applies to
SALTO Virtual Network 3.3.0
Last updated
2023-11-10
Content type
Guides > Plugin and extension guides
Language
English
Product
SALTO Virtual Network
Version
3.3

To monitor entities and events from SALTO ProAccess SPACE in Security Center, you must connect the SALTO Virtual Network plugin role to the SALTO SHIP server.

Before you begin

What you should know

Only specific configuration settings are described here. For more information about generic Config Tool settings, such as the Identity settings, see Common configuration tabs.

Procedure

  1. From the Config Tool home page, open the Plugins task.
  2. Select the SALTO role, and then click the Properties tab.
  3. In the Host option, enter the inbound TCP/IP address or computer hostname of the SALTO SHIP server.
  4. In the Port box, enter the inbound TCP/IP network port used by the SALTO SHIP server and SALTO Virtual Network plugin to communicate.
    IMPORTANT: This is the port number you entered when enabling the SALTO SHIP server. This port is different from the one used by the SALTO ProAccess SPACE web interface.
  5. (Optional) To prevent Security Center from overwriting SALTO holiday or special schedules during synchronization, turn on the Keep Salto schedules option.

    Salto Properties with Keep Salto Schedules highlighted.
  6. Click Apply.

Results

When the plugin connects to the SALTO SHIP server, the Server status changes from Disconnected to Connected.
Salto Properties with connection status highlighted.

After you finish

Synchronize with SALTO ProAccess SPACE.
Browse