Assigning cameras to elevators - Security Center 5.10

Security Center Administrator Guide 5.10

Applies to
Security Center 5.10
Last updated
2023-06-12
Content type
Guides > Administrator guides
Language
English
Product
Security Center
Version
5.10

To display a camera feed in a Security Desk monitoring tile when an elevator event occurs, such as Floor accessed or Access denied, you can assign cameras to elevator entities.

Before you begin

To monitor elevators with cameras, you must have one of the following Security Center configurations:
  • An Archiver role with available cameras.
  • An Omnicast™ Federation™ role to connect to an external Omnicast™ system.
  • A Security Center Federation™ role to connect to an external Security Center system with cameras.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Select the elevator entity to configure, and click the Floors tab.
  3. In the Cabin section, click Associate a camera ().
  4. From the Camera drop-down list, select a camera.
    If the camera has a PTZ motor, you can also include the PTZ preset number to ensure that the camera points towards the elevator.
  5. To add another camera to the elevator, click Associate a camera () again.
  6. To assign a camera to each elevator floor:
    1. In the Floors section, select a floor and click Edit the item ().
    2. In the Floor properties dialog box, click Associate a camera ().
    3. From the Camera drop-down list, select a camera.
    4. Click OK.
    5. Repeat the steps for all elevator floors.
  7. Click Apply.