To display a camera feed in a Security
Desk monitoring tile when an intrusion area
event occurs, such as Intrusion detection area disarmed, you can assign cameras to
intrusion detection area entities.
What you should know
When cameras are associated to the intrusion detection area and related intrusion
detection inputs and an event occurs, only the relevant cameras are shown, and the most
relevant is shown first. For example, when an area event occurs, only the cameras assigned
to the area are shown in the monitoring tile. When an input event occurs, the camera
assigned to the input is displayed first, and the cameras assigned to the area are
displayed in the other tiles. You can cycle or unpack the tile to display the video from
the other cameras.
Procedure
-
From the Config
Tool home page, open
the Area view task.
-
Select the intrusion detection area to configure, and then click the
Cameras tab.
-
Click Add an item (
).
-
In the dialog box that opens, select a camera, and then click
OK.
The camera is added to the
Cameras list.