Deploying mobile AutoVu™ systems - Security Center 5.10

Security Center Administrator Guide 5.10

Product
Security Center
Content type
Guides > Administrator guides
Version
5.10
Language
English
Last updated
2023-06-12

To integrate ALPR-equipped patrol vehicles into Security Center, you can deploy a mobile AutoVu™ system.

What you should know

Information about setting up a typical mobile AutoVu™ deployment is provided here. Your process might be different, depending on your specific installation requirements.
NOTE: Settings that are pre-configured during your installation are not listed in this task. For example, when you install Security Center, the ALPR Manager root folder is automatically created on your computer at the location C:\Genetec\AutoVu\RootFolder.

Procedure

  1. Log on to the Sharp Portal, and configure the Sharp for a mobile AutoVu™ system. For information about logging on to the Sharp Portal, see Logging on to the Sharp Portal.
  2. Connect Genetec Patroller™ to Security Center so that Genetec Patroller™ is discovered by the ALPR Manager.
  3. Connect mobile Sharp units to Genetec Patroller™.
  4. Configure the ALPR Manager server and database settings.
    NOTE: You can also add an additional server to act as secondary server for the ALPR Manager to set up failover. For more information, see Setting up role failover.
  5. Create and configure hotlist entities.
  6. Configure Genetec Patroller™.

After you finish

Configure the additional settings for your AutoVu™ mobile installation type: