Assigning archiving priorities for standby servers - Security Center 5.11

Security Center Administrator Guide 5.11
Applies to
Security Center 5.11
Last updated
2024-04-03
Content type
Guides > Administrator guides
Language
English
Product
Security Center
Version
5.11

If all the Archiver roles fail over to the same standby server at the same time, you can assign archiving priorities to the roles to avoid overloading the server.

What you should know

One server can be designated as the standby server for multiple Archiver roles. If all Archiver roles fail over to the same server at the same time, their combined load might be too much for the server to handle. To avoid overloading a server, you can assign a lower archiving priority to the less important roles so they are not competing for computer resources.
NOTE: At any time on a given server, only the Archiver role with the highest archiving priority is able to archive. The archiving priority only affects archiving. Having a lower archiving priority does not prevent a failed over Archiver role from performing its command and control functions.

Procedure

  1. Open the Video task, and select the Archiver role to configure.
  2. Click the Resources tab, and click Failover ().
  3. In the Failover dialog box, click Standby archiving priorities.
  4. Select a server from the Server drop-down list.

    All Archiver roles that rely on this server as their primary or secondary server are listed. The archiving priority can only be set when the server is used as a standby. For roles that rely on the server as their primary server, the archiving priority is implicitly locked at 1 (the highest).

  5. Set the priority of the roles, and click Save.
    NOTE: The archiving priority is specific to each Archiver role on each server. When the archiving priority has never been set, its default value is 1.
  6. Repeat these steps to configure all servers hosting Archiver roles on your system.
Parent topic: Setting up Archiver failover