Server Admin - Expansion server page - Security Center 5.11

Security Center Administrator Guide 5.11

Product
Security Center
Content type
Guides > Administrator guides
Version
5.11
Language
English
Last updated
2024-07-05

The Server Admin - Expansion server page shows all settings pertaining to the selected expansion server.

The expansion server page in Server Admin.

Actions

Click the Actions list beside the server name to see what actions can be applied to the expansion server.
The available actions are:
Directory
Activate
Convert the expansion server to a main server.
Genetec™ Server
Console
Open the Debug Console page (reserved for Genetec™ Technical Support Engineers).
Restart
Restart the Genetec™ Server service. This action renders the server temporarily unavailable.

Main server connection

This section identifies the main server that the expansion server must connect to.
Server address
The DNS name or the IP address of the main server.
Change password
Only appears when no connection has been established between the expansion server and the main server. Click to set the password. Once the first contact is made, the expansion server sends its identity certificate to the main server, and the password is not needed again.

Network

Use this section to configure the network card and the TCP listening port used by the Genetec™ Server service.
HTTP port
Port used by the Genetec™ Server service to listen to commands received from other Security Center servers on the public address.
Secure HTTP port
Port used by Genetec™ Server service for secured HTTP connections.
Private address
List of private addresses corresponding to the network interface cards (NIC) installed on this server. Only select the ones that are used for the communication between Security Center applications.
Private port
Port used by the main server to listen to incoming connection requests, and by all servers for communication between themselves, on the private IP address. (default = 5500).
NOTE: If you change this port on the main server, then all users must specify the new port number. This is found after the Directory name in the Logon dialog box, separated by a colon (:). This applies to all expansion servers. Specify the new port number after the Security Center Directory name in Server Admin, in the Main server connection section.
Legacy port
Port used by the Genetec™ Server service to listen to commands received from servers running an older version of Security Center (default = 4502).
Public address
Public address of the server.
Use IPv6
Use IPv6 for video streaming and communication between servers (only if your network supports it).
Proxy
Select this option if the server is used as the proxy server for a private network protected by a firewall.

Secure communication

Use this section to view the current identity certificate used by the server to communicate with other Security Center servers.
Issued to
Subject of the current certificate. A self-signed certificate created at software installation appears in the form GenetecServer-{MachineName}.
Issued by
Name of the certificate authority (CA) that issued the certificate. The issuer and the subject are the same for self-signed certificates.
Valid from/Expiration
Validity period of the current certificate.
Select certificate (button)
Dialog box listing all certificates installed on this machine. You can use this dialog box to change the certificate used for this server.

Some common certificate signature algorithms that we support are:

  • Elliptic Curve Digital Signature Algorithm (ECDSA)
  • Digital Signature Algorithm (DSA)
  • Rivest–Shamir–Adleman (RSA)
NOTE: After changing the certificate, manually reconnect your ALPR units to the ALPR Manager role.