About port forwarding for SharpV cameras using the LPM protocol or SSH tunnel - Security Center 5.12

Security Center Administrator Guide 5.12

Product
Security Center
Content type
Guides > Administrator guides
Version
5.12
Language
English
Last updated
2024-09-13

For SharpV cameras that use the LPM protocol to connect to Security Center, if either the SharpV or the ALPR Manager role is behind a network address translation (NAT), additional configuration is required.

IMPORTANT: Consider the following when designing your system:
  • If the SharpV camera or the ALPR Manager role are behind a NAT, it is not possible to configure a failover server.
  • If you have a multi-server system where the Directory and the ALPR Manager roles are installed on different machines, it is not possible to configure NAT port forwarding for the ALPR Manager role.

The SharpV is behind a NAT

If the SharpV is behind a NAT, you must configure port forwarding to forward the port of the NAT to the IP address and port of the SharpV. For example, if port 123 is available on the NAT, configure port forwarding to point to port 443 on the SharpV.

image/svg+xml NAT 123 443 Private network Public network

  • When adding the SharpV to the ALPR Manager using the Create a unit wizard, enter the IP address and port of the NAT.

    image/svg+xml NAT NAT

The ALPR Manager role is behind a NAT

If the ALPR Manager role is behind a NAT, you must configure the ALPR Manager listening port to match the inbound port that is configured on the NAT. For example, if port 8711 is available on the NAT and the firewall rules have been configured accordingly, configure port forwarding to point to port 8711 on the ALPR Manager.

image/svg+xml NAT Public network Private network 8711 8711

  • In the Server Admin Public address field, enter the hostname or IP address.

    Server page in Server Admin with the public address highlighted and a callout that the address of the NAT should be entered in the field.

  • When adding the SharpV to the ALPR Manager using the Create a unit wizard, enter the IP address and port of the SharpV.

    Creating a unit dialog box with the IP address and Ports fields highlighted.

  • Update the port that the ALPR Manager will be listening on. In this example where the NAT is configured to use port 8711, you would change the LPM protocol Listening port from the default port (10001) to port 8711.

    image/svg+xml