Assigning cameras to elevators - Security Center 5.12

To display a camera feed in a Security Desk monitoring tile when an elevator event occurs, such as Floor accessed or Access denied, you can assign cameras to elevator entities.

1. From the Config Tool homepage, open the Area view task.
2. Select the elevator entity to configure, and click the Floors tab.
3. In the Cabin section, click Associate a camera ().
4. From the Camera list, select a camera.
   If the camera has a PTZ motor, you can also include the PTZ preset number to ensure that the camera points towards the elevator.
5. To add another camera to the elevator, click Associate a camera () again.
6. To assign a camera to each elevator floor:
   1. In the Floors section, select a floor and click Edit the item ().
   2. In the Floor properties dialog box, click Associate a camera ().
   3. From the Camera list, select a camera.
   4. Click OK.
   5. Repeat the steps for all elevator floors.
7. Click Apply.