Assigning cameras to intrusion detection areas - Security Center 5.12

Security Center Administrator Guide 5.12
Product
Security Center
Content type
Guides > Administrator guides
Version
5.12
Language
English
Last updated
2024-08-13

To display a camera feed in a Security Desk monitoring tile when an intrusion area event occurs, you can assign cameras to intrusion detection area entities.

What you should know

If an event occurs when cameras are associated to the intrusion detection area and related intrusion detection inputs, only the relevant cameras are shown. The most relevant is shown first.

For example, when an area event occurs, only the cameras assigned to the area are shown in the monitoring tile. When an input event occurs, the camera assigned to the input is displayed first, and the cameras assigned to the area are displayed in the other tiles. You can cycle or unpack the tile to display the video from the other cameras.

Procedure

  1. From the Config Tool homepage, open the Area view task.
  2. Select the intrusion detection area to configure, and then click the Cameras tab.
  3. Click Add an item ().
  4. In the dialog box that opens, select a camera, and then click OK.
    The camera is added to the Cameras list.